April 13, 2020
Before I get into it, some quick details for modders! 10mm Tuners, and 2 1/16" Bridge spacing.
The guitar looks good, the chunk of maple the neck was made from looks good. The fretboard was pretty decent; no sharp fretwire sticking out. Fretends could use slight rounding.
Was able to do a setup with low action, intonating within +/-4 using GuitarTuna Chromatic Tuner. Low E would constantly fluctate in and around your tune. The strings are pretty bad, accidentally broke the D string adjusting a ...
Before I get into it, some quick details for modders! 10mm Tuners, and 2 1/16" Bridge spacing.
The guitar looks good, the chunk of maple the neck was made from looks good. The fretboard was pretty decent; no sharp fretwire sticking out. Fretends could use slight rounding.
Was able to do a setup with low action, intonating within +/-4 using GuitarTuna Chromatic Tuner. Low E would constantly fluctate in and around your tune. The strings are pretty bad, accidentally broke the D string adjusting action today after changing the Nut and Tuners. New strings on the way. Original tuners are not half bad. Sealed and very functional. Original Nut will be getting cut into by the strings, will need to replace after little use. Bridge is hard to work with, the screws for action are far too long, once you've adjusted for lower action you will have about a quarter inch of sharp screws sticking out so palm muting is NOT comfortable. Guitar does not sound too bad or play too bad though, worth the price or more.
I had high hopes for this guitar, however the guitar I received had a few issues, one might be a knish issue.
1. The screws do not seat straight into the neck.
2. There is a small gap between the body and the back of the neck, likely due to the mounting pilot holes not being drilled straight.
3. (possibly knish) There is about an 1/8" gap between the finger board and the body.
4. (easily fixable) There were a few scuffs and dings in the neck, but it comes quite chunky and sanding it down a few layers is well rewarding.
Service Team:
We appreciate your support for Glarry. If you have other questions, please contact our customer support center [email protected], we will do everything we can to help you. Glarry.